i) | (MASKING) G HUE | (CSR: F200 | 0044 h) |
|
|
| |
| Setting value 820000xx h | xx: 00h to FFh (standard 80h) | |
j) | (MASKING) C HUE | (CSR: F200 | 0048 h) |
|
|
| |
| Setting value 820000xx h | xx: 00h to FFh (standard 80h) | |
k) (MASKING) B HUE | (CSR: F200 | 004C h) | |
|
|
| |
| Setting value 820000xx h | xx: 00h to FFh (standard 80h) | |
l) | (MASKING) M HUE | (CSR: F200 | 0050 h) |
|
|
| |
| Setting value 820000xx h | xx: 00h to FFh (standard 80h) |
(2)PAINT BLACK
Color level of R,G, and B can be separately varied.
*This function is only for
a) (PAINT BLACK) RED | (CSR: F200 0120 h) |
| |
Setting value 820000xx h | xx: 00h to FFh (standard 00h) |
Color level of RED is adjusted manually. Color level is reduced at 00h side and raised at FFh side. | |
b) (PAINT BLACK) GREEN | (CSR: F200 0124 h) |
| |
Setting value 820000xx h | xx: 00h to FFh (standard 00h) |
It is same as RED. |
|
c) (PAINT BLACK) BLUE | (CSR: F200 0128 h) |
| |
Setting value 820000xx h | xx: 00h to FFh (standard 00h) |
It is same as RED |
|
| |
(1) PORT1 | (CSR: F200 0000 h) |
| |
Setting value 80000000 h |
|
| |
Setting value 8200000x h | x: 0- TRIGGER IN, 1- STROBE OUT, 2- VD OUT, 3- PORT2 OUT |
Input and output signal is switched at value of x. When TRIGGER SOURCE is PORT1, x is set to TRIGGER IN | |
automatically. |
|
PORT2 | (CSR: F200 0004 h) |
| |
Setting value 80000000 h |
|
| |
Setting value 82000000x h | x: 0- TRIGGER IN, 1- FLUSH OUT, 2- VD OUT, 3- PORT1 OUT |
It is same as PORT1. |
|
(2) READOUT SET | (CSR: F200 0008 h) |
Set readout source for mode 14 (Reset control) trigger operation.
8