Hitachi Specifications, 10), 11), 12), 13), 14), 15), 16), 17), 18), 19), 20), 21), 22), 23), 24), 25), 26), 27), Gain, Mode, Mass, Input, Gamma, OFF/ON, OFF/ON

Specifications

Specifications of KP-FD140F/F140F/FD32F/F32F/F83F are showing.

		KP-FD140F/F140F		KP-FD32F/F32F	KP-F83F
1)	Imaging device	1/2-inch interline CCD			1/3-inch interline CCD
	Total pixels	1434 (H) x 1050 (V)		692(H) x 504(V)	1079(H) x 789(V)
	Effective pixels	1392 (H) x 1024 (V)		656(H) x 492(V)	1034(H) x 779(V)
	Pixel size	4.65μm (H) x 4.65μm (V)		9.9μm (H) x 9.9μm (V)	4.65μm (H) x 4.65μm (V)
	Color filter	RGB primary color mosaic filters (FD140/FD32F)
2)	Scanning system			Progressive scan
3)	Synchronization		Internal / external (auto selection)
4)	Video signal output
	Interface			IEEE1394.b (FireWire800)
	Protocol	IEEE1394-based Digital Camera Specification Version 1.31 compliant
	Transfer rate			800 / 400 / 200Mbps
	Image format	RGB24 / RGB48 / YUV4:2:2 / RAW8 / RAW１6 for FD140F/FD32F
			MONO8 / MONO16 for all model
	Image size	1360(H) x 1024(V)		656(H) x 492(V)	1024(H) x 768(V)
		1280(H) x 960(V)		640(H) x 480(V)	800(H) x 600(V)
		1024(H) x 768(V)			640(H) x 480(V)
		800(H) x 600(V)
		640(H) x 480(V)
	Frame rate	15fps (1360 x 1024)		60fps (656 x 492)	30fps (1024 x 768)
5)	Standard sensitivity	2000lx F5.6 : KP-FD32F/F32F, 2000lx F8 : KP-FD140F/F140F/F83F
6)	Minimum illumination	10lx (F1.4 Gain Max) : KP-FD32F/F32F, 5lx (F1.4 Gain Max) : KP-FD140F/F140F/F83F
7)	Gain			Auto / Manual (0dB to 18dB)
8)	Electric shutter	Auto (AES) / Manual (VARIABLE) 1/100,000 second to 10 second
9)	External trigger shutter
	Mode	Fixed shutter (Mode0), One trigger (Mode1)
		Reset control (Mode14), VD Sync (Mode15)
	Input	Via IEEE1394 cable (Software trigger ) Our company original method (Hardware trigger)
10)	Power supply	Approx. 4.1W (DC+12V)		Approx. 3.5W (DC+12V)	Approx. 3.2W (DC+12V)
11)	White balance	ATW / MANUAL / One-Push (FD140F/FD32F)
12)	Gamma			OFF／LUT
13)	Masking	OFF / ON (6 color independent masking)
14)	Saturation	Adjustable (FD140F/FD32F)
15)	Sharpness			Adjustable
16)	Brightness			Adjustable
17)	Time stamp			OFF/ON
18)	Cycle timer sync			OFF/ON
19)	Daisy chain	Possible. Even if there is no repeater. If two are connected, the frame rate become half.
20)	Lens mount	Ｃ mount （Flange-back adjustment)
21)	Power supply	DC+8V to +30V (Via IEEE1394 cable)
22)	Ambient temperature
	Operating		-10℃ to ＋50℃, 30 to 80%RH
		Note: If operated continuously, be sure to use at 0℃ to +40℃ (104F)
			for long term stable performance.
	Storage		-20℃ to ＋60℃ / 20 to 90%RH
23)	Vibration endurance	68.56m/s2	(10 to 200Hz 30 minutes each on XYZ axes)
		*Please do not add the strong vibration over long time.
24)	Shock endurance	490.3m/s2 (vertical, horizontal, once each faze)
25)	Dimensions	44(W) x 44(H) x 54(D)mm (not including lens)
26)	Mass		Approx. 130g (not including lens)
27)	Standard composition	Camera, CD-ROM (Operation manual, Driver, SDK),Composition

16