Connections to other equipment

 

 

(continued)

 

To connect a HDMI or a DVI device to the unit

The HDMI 1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear of the unit

To DVI output

To PC/DVI

Audio cord (not supplied)

AUDIO IN

To HDMI1/DVI IN

 

HDMI - to - DVI adapter cable

 

(HDMI type A connector)

To HDMI1/DVI

(not supplied)

IN or HDMI2 IN

 

HDMI cable (type A connector)

(not supplied)

or

To HDMI out

DVI device

HDMI device

ENGLISH

NOTE:

• When using HDMI 1/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 17). Otherwise you will only see the image with no sound.

• If you connect an external component (cable box, satellite receiver, etc.) to this TV/DVD using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

Digital Audio

Coaxial Output

Coaxial digital cable (not supplied)

To Coaxial

Digital Audio Input

Front

Speaker

(Left)

Front

Subwoofer Speaker

(Right)

TV/DVD

Center Speaker

AV Amplifier with built-in digital surround decoder as listed above

Surround

Surround

Speaker (Left)

Speaker

 

(Right)

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

33

54H0321A_eng.indd 33

5/4/10 3:44:59 PM

Page 33
Image 33
Hitachi L26D204 manual To connect a Hdmi or a DVI device to the unit, Using an AV Amplifier with built-in digital surround