DISPLAY
Press DISPLAY to display the current information on the screen.
When the TV receives a digital signal, the digital information will appear.
|
|
|
| Sleep Timer |
|
|
| HDTV_Moving_Picture... |
| ||
|
| Off |
| ||
|
| Digital Air | English |
| |
|
| No Program Information is available |
|
| |
|
| Full |
|
| |
|
| 1080i |
|
| |
|
|
|
|
| |
• Channel number | • Station name | ||||
• Channel label (if preset) | • | Broadcast program name | |||
• | Parental Control | • | Signal type | ||
• | Sleep timer | • | Audio language | ||
• | Program guide | • | Picture size | ||
• | Resolution |
|
| ||
When the TV receives an analog signal, the analog information will appear.
|
|
|
| Sleep Timer |
|
|
| 14 |
|
| |
|
|
| X | Off |
|
|
| Analog Cable |
|
| |
|
| Mono |
|
| |
|
| Full |
|
| |
|
| 480i |
|
| |
|
|
|
|
|
|
• | Channel number | • Channel label (if preset) | |||
• | Parental Control | • | Signal type | ||
• | Sleep timer | • | Picture size | ||
• | Audio information | • | Resolution | ||
|
| (Stereo, SAP or Mono) |
|
| |
Press DISPLAY again to clear the display.
NOTE:
• After a few seconds the DISPLAY screen will return to normal TV operation automatically.
LAST CH
This button allows you to go back to the last channel selected by pressing LAST CH. Press LAST CH again to return to the last channel you were watching.
MUTE
Press MUTE to switch off the sound. The TV’s sound will be silenced and “Mute” will appear on the screen. The sound can be switched back on by pressing this button again or by pressing the VOL + or – buttons.
SLEEP
To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each press of the SLEEP button (Off, 0h 10m, 0h 20m, ...,
2h 0m). After the sleep timer is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating. To confirm the sleep timer setting, press SLEEP and the remaining time will be displayed for a few seconds. To cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.
Quick guide for menu operation
Example: Select Menu Language.
1 Press INPUT to select TV mode.
2 Press TV MENU. The TV menu screen will appear.
Main Menu
| Video | >> |
| Audio |
|
CH | Channel |
|
| Locks |
|
| Setup |
|
3 | :Move | ENTER :Select |
Press ▲ or ▼ to select “Setup”, then press ▶ or ENTER. | ||
| Press ▲ or ▼ to select “Menu Language”, then press ◀ or ▶ | |
4 to select the desired language. | ||
| On the following pages the menu can be called in the same | |
5 | way as here. |
|
Press EXIT to return to the normal screen. | ||
NOTE:
• If no buttons are pressed for more than 60 seconds, the menu screen will clear and the TV will return to normal viewing automatically.
ENGLISH
17
56P5021A_eng.indd 17
5/21/11 3:21:24 PM
