Hitachi L26D205 Marking desired scenes, Changing soundtrack, language, Subtitles, Changing angles

NOTE:

• In case of JPEG-playback, the JPEG-image is rotated 90 degrees to the right.

• Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.

Press ANGLE repeatedly until the desired angle is selected.

Turning the subtitles off

Press SUBTITLE during playback until “Off” appears.

2

Marking desired scenes					Changing soundtrack
					language
The TV/DVD stores the points that you want to watch again up to
12 points.
					You can select the language when you play a multilingual disc.
You can resume playback from each scene.
Marking the scenes							Press AUDIO during playback.
1		Press MARKER during playback.			1 The current soundtrack language will appear.
								Current/Total
		Select the blank Marker using ▲/▼/◀/▶, then press ENTER						Audio 1/2 English	Dolby Digital 2/0CH
2 at the desired scene.
		•	Up to 12 scenes can be selected.
		•	Repeat this procedure to set the other 11 scenes.
3 Press MARKER to return to the normal screen.							Press AUDIO repeatedly until the desired language is
					2 selected.
Returning to the scenes							The on-screen display will disappear after a few seconds.
1 Press MARKER during playback or stop mode.
								Current/Total
								Audio 2/2 French	Dolby Digital 2/0CH
2		Press ▲/▼/◀/▶ to select the Marker 1-12.
3		Press ENTER.
		Playback starts from the marked scene.			NOTE:
To cancel the Marker					•	If the desired language is not heard after pressing AUDIO
Follow the above steps 1~2, then press CANCEL.					•	several times, the language is not recorded on the disc.
NOTE:						Changing soundtrack language is cancelled after “Resume off”.
					•	The initial default language or available language will be heard if
•	Some discs may not work with the marking operation.					the disc is played back again.
•	The marking is cancelled when you eject the disc or turn the				Subtitles
	power off.
•	Some subtitles recorded around the marker may fail to appear.
					Changing the subtitle language
Changing angles
					You can select the language when playing back a disc recorded
					with multilingual subtitles.
When playing back a disc recorded with multi-angle facility, you
					1 Press SUBTITLE repeatedly during playback until your
can change the view angle.
1		Press ANGLE during playback.					desired language appears.
							The on-screen display will disappear after a few seconds.
		The current angle will appear.
								Current/Total
				Current/Total				Subtitle 1/2 English
			Angle 1/2

NOTE:

• Changing subtitle language is cancelled after “Resume off”.

• Some functions may not work on some DVDs. You may not be able to turn subtitles on or off or change subtitles.

While playing the DVD, the subtitle may change when: - you eject or insert the disc.

- you change the title.

• In some cases, the subtitle language is not changed to the selected one immediately.

26

56P5021A_eng.indd 26

5/21/11 3:21:46 PM