18
CONNECTION (continued) Connecting Procedure (continued)

4. Connecting the plug into the wall socket

Connect the power cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
CAUTION
Ɣ Use only the power cord provided.
ƔDo not use a power supply voltage other than that indicated (AC110-240V, 50/60Hz). It may cause fire or electric
shock.
ƔFor the LCD panel, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure to
connect the power cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you
use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
ƔEnsure that both ends of power cord are easily accessible.
ƔIf you have to change the power cord, please use the certified power cord that meets your region’s safety standard.
Information
zHow to secure the power cord and cables
Step 1. Secure the power cord
After connecting power cord to the rear panel, secure the power cord with the clamp.
Step 2. Secure all cables
Secure all cables together with power cord by using large clamp.

!

NOTE
Ɣ When you secure the cables, please be careful not to tighten too much.
Clamp for power cord
(example: L32H01AU) Large clamp
(example: L32H01AU)