DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Installing Channels
You can search available channels in any of the following 3 methods.
1.Press 
button on the remote control in DTT mode.
2.Select “Installation”, on the DTT main menu with 
buttons and press 
button.
3.The password is required to enter the Installation menu. The initial password is 0000.
4.You can select either of the followings by pressing 
button.
ξManual scan: Searches by individual settings manually.
The box shown on the right appears. Fill out the following 4 items as needed.
Channel | Use | buttons or numeric button to enter the number. | |||
num | |||||
(Frequency: 205.5MHz.). |
|
| |||
|
|
| |||
Frequency | Use numeric button to enter the frequency. |
| |||
Bandwidth | Select either 7MHz or 8MHz by using | buttons. Set to | |||
7MHz normally. |
|
| |||
|
|
| |||
Priority | Select | High or Low by using | buttons. Set to High | ||
normally. |
|
| |||
|
|
| |||
Then, press 
button on “Start scan” of “Manual scan” column. If it finds a channel, “Success” shows up. If not, “Timeout error” is displayed.
ξQuick scan: Searches channels of the selected area.
The list of the area shows up. Select one of those with | buttons and press |
button. |
|
NOTE
Installation | Channel num | 6 |
Manual scan | Frequency | 177500KHz |
Quick scan | Bandwidth | 7 MHz |
Auto scan | Priority | High |
Restore default | Manual scan | Start scan |
|
|
Installation | Adelaide |
Manual scan | Brisbane |
Quick scan | Melbourne |
Auto scan | Perth |
Restore default | Sydney |
Batchelor
Canberra
Darwin
Press Ÿźto select city.
ξIf you are uncertain about the area, please select “Auto scan” method or contact the local dealer in your area.
ξAuto scan: Searches every channel.
The message “Auto scan will take more than 10 minutes. Do you want to continue?”
Select “Yes” and press 
button to precede it.
Restoring Channels
This restores the all channel settings.
1.Press 
button on the remote control in DTT mode.
2.Select “Installation”, on the DTT main menu with 
buttons and press 
button.
3.The password is required to enter the Installation menu. The initial password is 0000.
4.Select “Restore default” and press 
button. The message “All setting would be lost” appears. Select “Yes” and press 
button.
NOTE
ξThe password will return to the default setting when activating “Restore default”/
|
|
|
|
|
|
| Installation | Auto scan will take more |
| ||
| Manual scan | than 10 minutes. |
| ||
| Do you want to continue? |
| |||
| Quick scan |
| |||
|
|
|
|
| |
|
|
| Yes | Exit |
|
| Auto scan | ||||
|
|
|
|
| |
| Restore default |
|
|
|
|
|
|
|
|
|
|
Installation |
|
| All setting would be lost. | |
Manual scan |
|
| Yes | Exit |
|
|
|
|
|
Quick scan
Auto scan
Restore default
37
