10
How to attach the stand

Installing the stand

Tips
Unplug the AC cord from the AC INPUT jack.
Before beginning this process, make sure that you lay the unit
on a clean, safe, and cushioned surface to avoid any damage to
the unit.
Do not touch or press the TV screen. The glass might break
under pressure.
To install the stand:
1 Place the unit face down on table, aligning the bottom of the
unit with the edge of the table.
Place a towel or similar material between the screen and the
table to protect the screen.
2 Align the stand assembly with the metal bracket on the bottom
of the unit. The bracket will only fit in one direction. Do not touch
or apply pressure to the screen. It may break.
3 Place the base on the stand assembly. Make sure that the
symbol ▲ is pointing toward the screen side of the unit.
•
•
•
4 Secure the bottom plate with the four provided silver screws
(M6×10mm)
Note:
To remove the stand, reverse these steps.•
00_54L0621A.indb 1000_54L0621A.indb 10 10.4.27 3:14:59 PM10.4.27 3:14:59 PM