Hitachi L32BD304 manual Securing to a Wall, These symptoms, This is not a sign of a malfunction

Models: L32BD304

1 39
Download 39 pages 47.77 Kb
Page 6
Image 6

SAFETY PRECAUTIONS

The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunlight. When placing on a shelf leave 4 inches (10 cm) free space around the entire unit.

4 inches

4 inches

Notes when mounting the LCD TV/BD on a wall

If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/BD for advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LCD TV/BD.

The screws ISO M6 thread type should be used. The insertion length must be within 12 - 16mm. If the insertion length is less than 12mm, the weight can not be maintained.

If the insertion length is more than 16mm, a space is created between the Wall Mount Bracket and the Television. (Insertion Length) = (Screw Length) - (Washers Thickness) - (Mounting Bracket Thickness)

Securing to a Wall

1.Using metallic wire fasten the set to the clamping screw (supplied) on the rear of the LCD TV/BD as shown below.

2.Keep the LCD TV/BD 4 inches away from the wall except when mounted using the wall mount bracket and secure to the wall as shown below:

Wire

Wire

4 inches

Screw Clamp

NOTICE FOR TV CABINET

Wire

If the unit is to be mounted on a cabinet smaller than length of the unit, it could result in an unstable location and the unit may tumble over, making a risk of personal, possibly fatal injury. Also, this would damage the product seriously. Accordingly, Hitachi accepts no responsibility or liability for any injuries or property damage resulting from the improper installation.

YES !!NO !!

IMPORTANT NOTICE

The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility for

these symptoms.

LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be

 

missing picture elements or have luminous spots.

This is not a sign of a malfunction.

Do not install the LCD Panel near electronic equipment that is susceptible to electromagnetic waves. Some equipment placed too

6

near this unit may cause interference.

Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.

Page 6
Image 6
Hitachi L32BD304 manual Securing to a Wall, These symptoms, Missing picture elements or have luminous spots