73REFERENCES, Symptoms Remedies/Causes | JVC KW-AVX900 specs

DivX/MPEG1/MPEG2/JPEG/MP3/WMA/WAV/AAC

SD/USB

TV

Symptoms	Remedies/Causes
• Disc cannot be played back.	• Change the disc.
	• Record the tracks using a compliant application in the
	appropriate discs. (☞page 4)
	• Add appropriate extension codes to the file names.
• Noise is generated.	The track played back is not a playable file format. Skip to
	another file.

• Tracks are not played back as you have	Playback order may differs from the one played back using
intended them to play.	other players.

• Elapsed playing time is not correct.	This sometimes occurs during playback. This is caused by
	how the tracks are recorded.

• “Not Support” appears on the monitor and	The track is unplayable.
track skips.
• Noise is generated.	The track played back is not a playable file format. Skip to
	another file.
• Tracks cannot play back as you have	Playback order may differs from the one played back using
intended them to play.	other players.
• “Now Reading...” keeps flashing on the	• Readout time varies depending on the SD card/USB
monitor.	device.
	• Do not use too many hierarchy and folders.
	• Turn off the power then on again.
• Correct characters are not displayed (e.g.	For available characters, ☞page 69.
album name).
• While playing a track, sound is sometimes	The tracks are not properly copied into the SD card/USB
interrupted.	device. Copy tracks again, and try again.
• TV stations cannot be received.	<TV Channel Area> setting is not correct (☞page 58).
• “Reset 08” appears on the monitor.	Reset the unit. (☞page 3)

Continued on the next page

73REFERENCES

Image 73

JVC KW-AVX900 manual 73REFERENCES, Symptoms Remedies/Causes

Contents

KW-AVX900 Thank you for purchasing a JVC product Chemical changes occur inside, causing malfunctionPossible performance from the unit Contents Disc type Recording format, file type, etc Playable disc typeDual Disc CD-R/-RW 5INTRODUCTION Before using the remote controller Installing the battery 7INTRODUCTION For Bluetooth operationsFor FM/AM operations For TV operations @ Set the clock settings ~ Turn on the power Display AV Menu Display the Setup menu¤ Finish the procedure Select Off 9OPERATIONS Common operations Press SOURCE, then press TUNER. Listening to the radioPress Band Press 4 or ¢ to search for a station-Auto Search Press Mode Tuning in to stations with sufficient signal strength11OPERATIONS Then To select directly on the touch panel To select from the Preset ListOn the remote On the unit 13OPERATIONS Disc operations~ Open the monitor panel Press Open While playing the following discs, press Speaker/signal Surround mode Indicators 15OPERATIONS While playing a DTS-CD To erase the operations, touch the screen again Operation buttons on the monitor screen Repeat To cancel, select Off 19OPERATIONS To cancel the prohibition, repeat the sameSelecting tracks on the list Select a folder 1, then a track Operations using the remote controller-RM-RK251 21OPERATIONS Using Original Program/Play List screensWhile playing During PBC playback To cancel PBC playback 23OPERATIONS Using the list screensPlaying back a bonus group Selecting browsable still picture Enjoying surround sounds Only when selecting Dolby PL IIMusicTo turn on the surround Dolby PL II Movie Activates Dolby Pro Logic II Movie Operations using the on-screen bar On the remote controller25OPERATIONS To remove the on-screen bar On-screen bar OFF Deactivates Dual Zone 27OPERATIONSTV You can watch the TV programs To select a track To select a folder or trackSelect a folder or track 29OPERATIONS Operations using the list screenTo change the playback modes Insert a SD card SD operations⁄ Close the monitor panel You can also press 31OPERATIONS To cancel, select Off File type Intro Repeat Random Press SOURCE, then press USB. USB operationsDo not start the car engine if a USB device is connected Folder Repeats current folder 33OPERATIONS Watching TV Press AV Menu Press ModePress SOURCE, then press TV. Preparation 35OPERATIONS To display the operation buttons while watching TV Changing on-screen informationKEY Registering a Bluetooth device Registration Pairing methods To register using OpenTo do Open To connect a special device Special Device To register using SearchTo connect/disconnect a registered device To delete a registered device When a call comes Press SOURCE, then press Bluetooth PHONE.Press AV Menu To end the call To make a call When an SMS comes To redial the dialed numbers How to enter phone numberDial Calls the entered number Presetting the phone numbers To call a preset numberPress Bluetooth Press Dial Menu, then Calls, or Missed Calls Bluetooth Information ~ Press SOURCE, then press Bluetooth AUDIO.Start playback Display the Disc List Listening to the CD changer⁄ Select a disc to start playing Changer with your unit Intro Repeat Random Ex. To select Track Repeat for an MP3 disc for CDs,Current disc Loaded discs Selecting a track from the player’s menu Listening to the iPod/D. playerPlayback starts automatically Press 4 or ¢ to select a track Press ∞ to confirm the selection All or Repeat Mode =AllRepeat steps 2 and 3 to select a track =On Press SOURCE, then press AV-IN. Using other external componentsTouch the screen center portion Touch the screen center portion Navigation screen When Navigation is selected for AV Input.Make sure Navigation is selected for AV Input. ~ Press SOURCE, then press EXT-IN. External DevicesMake sure External is selected for External Input. 51SETTINGS Selecting sound modeSelect a sound mode Storing your own adjustment Repeat steps ~and Ÿ, then in step Adjust 1, then store Assigning titles to the sources ⁄ Finish the procedureAssign a title ~ Select the source. Change the setting Ex. Changing the AV Input setting 53SETTINGSMenu operations Menu items Demonstration Wall Paper Color Scroll Dimmer SetupWarp Drive, X-Face, Wave, Ring Green, Dark-Red, Brown, Black Display 55SETTINGS Disc Regardless of the setting above 57SETTINGSFront Small, Large Center None, Small, Large Input TunerMenu items If Band Width AV Input*9 Input Others 59SETTINGSDisc Surround*14 Sound Equalizer Settings Bluetooth*19Mode*18 List Disconnect Only for the device being connected Establish the connection with itMenu items Auto Connect *22 Auto Answer *23 Reject The unit rejects all incoming calls To keep discs clean MaintenanceHow to handle discs Moisture condensation General More about this unit 65REFERENCES File playback Files which have the data such as AIFF, ATRAC3, etc MP3 files encoded with Layer 1/2 IPod/D. player operations CD changer67REFERENCES Icons for phone types Title assignment Menu settingsAbout sounds reproduced through the rear terminals Official DivX Ultra Certified product Characters shown on the monitor Preset equalizing values69REFERENCES Language Language codes for DVD/DivX language selection General Symptoms Remedies/Causes Troubleshooting71REFERENCES General Disc in general Symptoms Remedies/Causes 73REFERENCES Symptoms Remedies/Causes Bluetooth CD changer Symptoms Remedies/Causes IPod/D. player 75REFERENCES Amplifier FM/AM Tuner DVD/CD Specifications USB Monitor General 77REFERENCES Having Trouble with operation? Parts list for installation and connection Installing the remote controllerWhen installing the unit in a Nissan car Electrical Connections Precautions on power supply and speaker connections Installing the TV aerials Connecting the AV I/O cordConnecting the parking brake lead Attaching the TV aerials Connecting external components Connecting the external amplifiersUSB devices