JVC KW-AVX900 manual Bluetooth CD changer Symptoms Remedies/Causes

Bluetooth

CD changer

Symptoms	Remedies/Causes
• Bluetooth device does not detect the unit.	This unit can be connected with one Bluetooth cellular
	phone and one Bluetooth audio device at a time.
	While connecting a device, this unit cannot be detected
	from another device. Disconnect currently connected device
	and search again.
• The unit does not detect the Bluetooth	• Check the Bluetooth setting of the device.
device.	• Search from the Bluetooth device. After the device
	detects the unit, select <Open> on the unit to connect
	the device. (☞page 37)
• The unit does not make pairing with the	• Enter the same PIN code for both the unit and target
Bluetooth device.	device. If the PIN code of the device is not indicated on its
	instructions, try “0000” or “1234.”
	• Select the device name from <Special Device>, then
	try to connect again. (☞pages 38, 61)
• Echo or noise occurs.	Adjust the microphone unit position.
• Phone sound quality is poor.	• Reduce the distance between the unit and the Bluetooth
	audio device.
	• Move the car to place where you can get a better signal
	reception.
• The sound is interrupted or skipped during	• Reduce the distance between the unit and the Bluetooth
playback of a Bluetooth audio device.	audio device.
	• Disconnect the device connected for “Bluetooth PHONE.”
	• Turn off, then turn on the unit.
	• (When the sound is not yet restored,) connect the device
	again.
• “New Device” cannot be selected for	Bluetooth audio device is being connected. To select “New
“Bluetooth AUDIO.”	Device,” disconnect it. (☞page 38)
• The connected audio device cannot be	Check whether the connected audio device supports AVRCP
controlled.	(Audio Video Remote Control Profile).
• “Reset 08” appears on the monitor.	Check the connection between the adapter and this unit.
• “No Disc” appears on the monitor.	Insert a disc into the magazine.
• “No Magazine” appears on the monitor.	Insert the magazine.
• “Cannot play this disc Check the disc”	Disc does not include playable files. Replace the disc with
appears on the monitor.	playable files.
• “Reset 08” appears on the monitor.	Connect this unit and the CD changer correctly and press
	the reset button of the CD changer.
• “Reset 01” – “Reset 07” appears on the	Press the reset button of the CD changer.
monitor.
• The CD changer does not work at all.	Reset the unit. (☞page 3)

74