JVC KW-AVX900 Establish the connection with it, Disconnect Only for the device being connected

Menu items	Selectable settings, [reference page]
Connect	Only for the registered devices.
	After selecting a device from among the registered devices (☞ page 37, 38),
	establish the connection with it.
Disconnect	Only for the device being connected.
	Disconnect the current device before connecting another device.
Delete Pair	Only for the registered devices.
	Delete the registered devices.

*19 Selectable only for “Bluetooth PHONE” or “Bluetooth AUDIO.” Select a device (or “New Device”) before operating the menu.

*20 Only for the device connected for “Bluetooth PHONE.”

*21 Selectable only when the source is “Bluetooth PHONE” and the device is compatible with SMS (Short Message Service).

When operating the Bluetooth device, refer also to the instructions supplied with the device.

Menu items

Auto Connect *22

Auto Answer *23

Settings

Message Info *23

MIC Setting *23

Version *24

Selectable settings, [reference page]

When the unit is turned on, the connection is established automatically with...

Off: No Bluetooth device.

Last: The last connected Bluetooth device.

Order: The available registered Bluetooth device found at first.

Off: The unit does not answer the calls automatically. Answer the calls manually.

On: The unit answers the incoming calls automatically.

Reject: The unit rejects all incoming calls.

Auto: The unit informs you of the arrival of a message by ringing and displaying “Receiving Message.” To read the message, ☞ page 40.

Manual: The unit does not informs you of the arrival of a message.

Adjust microphone volume connected to the Bluetooth adapter. 01/02/03 Initial 02

The Bluetooth software and hardware versions are shown.

*22 Selectable only for “Bluetooth PHONE.”

*23 Only for the device connected for “Bluetooth PHONE.” Not selectable when “New Device” is selected. *24 If you wish to receive more information about Bluetooth, visit our JVC web site.

62