TV Setup
To be able to go through TV functions, you can use this item.
The digital TV Setup menu screen is accessed from
the main menu. Press the 
button to display the main menu and use a / b button to highlight “TV Setup”, press the OK button to display TV Setup menu screen.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Detailed information about Sound, Picture and Fea- ture menus are in Analogue TV Menu System section on page 23.
Common Interface
•Press the 
button to display the Main Menu and use the a / b button to highlight the “Common Interface” line and press the OK button.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
It is required to subscribe to a pay channel company to view the pay channels of the Digital Terrestrial broad- casting.
Obtain the Conditional Access Module (CAM) and the Viewing card by subscribing to a pay channel com- pany, then insert those to the Television using the following procedure.
1.Switch off the TV and unplug from the mains.
2.Insert the CAM, then Viewing Card to the slot that is located in the terminal cover at the
•The CAM should be correctly inserted, it is impos- sible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
3.Connect the TV to the mains supply, switch on and then wait for few moments until the card is acti- vated.
•Some CAMs may require the following set up. Please set the CAM by entering the IDTV menu, Common Interface then pressing the OK button. (CAM set up menu is not displayed when it is not required.)
•To see the viewing contract information:
Enter IDTV; press the 
button, then highlight Com- mon Interface and press the OK button.
•When no module is inserted, “No Common Inter- face module detected” message appears on the screen.
•Refer to the module instruction manual for details of the settings.
Downloaded From
