Analogue TV Menu System
Picture Menu
PICTURE |
Mode |
Contrast |
Brightness |
Sharpness |
Colour |
In the picture menu; if PC, YPbPr or HDMI modes is selected, resolution information is displayed at the bottom of the menu OSD.
Mode
By pressing a / b button, select Mode. Press _ / ` button to choose from one of these options: Cinema, Dynamic and Natural.
Contrast/Brightness/Sharpness/Colour/Hue
By pressing a / b button, select the desired Option. Press _ / ` button to set the level.
Hint: Hue is displayed in picture menu when the TV receives an NTSC signal.
Colour Temp
•By pressing a / b button select Colour Temp.
•Press _ / ` to choose from one of these options: Cool, Normal and Warm.
Noise Reduction
By pressing a / b button select Noise Reduction. Press _ / ` to choose from one of these options: Low, Medium, High or Off.
Film Mode
Films are recorded at a different number offrames per second to normal television programmes.
By pressing a / b button, select Film Mode.
Press _ / ` button to set this feature On or Off. Turn this feature on when you are watchingfilms to see the fast motion scenes clearly.
3D Comb
3D Comb is used to improve colour transitions and colour quality of pictures.
Bypressinga / b button, select 3D Comb. Press _ / ` button to set this feature On or Off.
Note: 3D Comb feature is not functional in NATU- RAL picture mode.
Picture Zoom
By pressing a / b button select Picture Zoom. Use _ / ` buttons, to change picture zoom to Auto, 16:9, 4:3, Panaromic, 14:9 Zoom, Cinema, Sub- title or Zoom.
Reset
By pressing a / b button, select Reset. Press ` or “OK” button to reset the picture modes to factory default settings.
Sound Menu
SOUND |
Volume |
Equalizer |
Balance |
Headphone |
Sound Mode |
Volume
By pressing a / b select Volume . Press _ / ` button to change the level of the Volume.
Equalizer
By pressing a / b select Equalizer.Press _ / ` button to change the Equalizer setting. In equalizer menu, the mode can be changed to Pop, Rock, Jazz, Flat, Classic or User. Select the desired frequency by a / b button and increase or decrease the fre- quency gain by pressing _ / ` button.
Note: Equalizer menu settings can be altered only when the Equalizer Mode is in User.
Downloaded From
