Switching The TV ON/OFF
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power cord to the system. Press Power ON/OFF switch. Then the TV switches itself to
Note that the TV will always switch to
2- To switch on the TV from
Press a digit button on the remote control so that a programme number is selected, or Press the
By either method the TV will switch on.
To switch the TV off:
•Press the “
To power down the TV completely, press On/Off switch
or,
Unplug the power cord from the mains socket.
Navigating the Menu System
Initial Settings
When the TV is turned on for the first time, IDTV is on first. Because this is the first time that IDTV has been used, there are no channels stored in the memory.
When the TV is turned on for the first time, the menu for the language selection appears on the screen. The message “Welcome please select your lan- guage!” is written in all language options sequen- tially in the menu on the screen.
By pressing or buttons highlight the language you want to set and press OK button. In the menu “Set Language” is written next to “OK” item to indicate that “Press SELECT button to set the highlighted lan- guage option.”
You can get information about the menu usage by
pressing button. And press button again to exit the help menu.
After then, First time Installation Menu will appear on
screen. By pressing or buttons, selected coun- try item you want to set and press OK button.
First time installation
Choose Country
OK Set country and continue installation | Czech |
After the First time Installation is set, the following message appears on the screen.
For Displaying | MENU | GUIDE |
Menu Options |
| For Navigation |
|
| |
|
| OK |
| FUNCTION | RETURN |
| + |
|
|
| To Confirm Choices |
1- Press | to display the menu. |
2- Press | _ or ` button to select an icon. |
3- Use bor a button to highlight. Press ` for more options in analogue TV mode. UseOK in DTV mode for viewing a submenu.
4- Press _ or ` buttons to change the settings. Press OK to set as default.
5- To exit the menu or return from
press .
These explanations are available for the navigation
of the whole Menu System. To select options that are
explained in the following parts, refer to “Navigating
The Menu System”.
Do you want to start automatic search?
Yes |
| No |
•To start automatic search, select Yes, to cancel select No.
•To select an option “Yes or No”, highlight the item by
using or buttons and press OK button.
The IDTV will automatically tune to the transmission channels according to selected country standards looking for digital terrestrial TV broadcasts and dis- playing the names of channels found. This process will take about five minutes. To cancel searching, you
can press button at any time during the process.
Automatic Search
Codec 4:3
Codec 16:9
Searching UHF channels 62. Please wait. This will take a few minutes
MENU Cancel searching
English - 10 -
Downloaded From