Line 6 POD X3 Family manual System Page 1 Pedal and other settings

Reference: Configuration & Setup

to increase the digital output level of sounds that don’t have a lot of Amp Model or stompbox distortion or other settings that are driving their levels up.

Format – selects the digital output’s format, either S/PDIF or AES/EBU for POD X3 Pro, S/PDIF for POD X3 and POD X3 Live.

System

Press and hold the Outputs / Hold for System button for 2 seconds to get to the System page:

	SYSTEM
CNTRL	TONE:1	TONE:2	SETS
BOTH	1-W/V	1-W/V	ALL
TONES	(2-VOL)	(2-VOL)	OUTS
PEDAL	PEDALMODE	DIGPEDALLVL	MSTVOL
TONE:1	TONE:2	TONE1:	TONE2:
DELAY	DELAY	COMP	COMP
MIX	MIX
TWK	TWK	LP SW	LP SW

6•5

Press the 4-way Nav Up and Down to move between this and page 2.

System Page 1: Pedal and other settings

The Pedal-related settings here are for the wah/voume/tweak pedal built-in to POD X3 Live, and the pedal on some FBV foot controllers that can be used with POD X3 and POD X3 Pro.

Pedal – use this to have the pedal affect either Tone 1, Tone 2 or Both.

PedalTone:1 & PedalTone:2 – The built-in pedal on a POD X3 Live and some FBV foot controllers is pedal “1” and the optional external pedal you can connect to it is pedal “2”. Here you can select what those pedals control, with these choices:

•1-W/off 2-Vol – Pedal 1 controls Wah with the toe switch controlling Wah on/off. Pedal 2, if present, controls Volume.

•1-Twk 2-Vol – Pedal 1 controls whatever is assigned to Tweak in the lower half of the LCD display. Pedal 2, if present, controls Volume.