Line 6 POD X3 Family manual Delay

Reference:Tweaking Tones

Delay

Select Knob – turn to pick a Delay model.

Time – for mono delays, sets the time for the delay line; for stereo delays, sets the time	5•9
for the left side delay line.

Tap – set this to OFF to have this effect ignore tempo, or pick a note value that you’d like your speed to match; works with the Tap button/footswitch and the Tempo knob.

Tempo – Shows the tempo that’s been set by Tap, and lets you fine tune it.

Mix – controls the ratio of wet (effected) to dry (non-effected) sound that is heard.

Bass – bass tone control.

Treble – treble tone control.

Fdbk – adjusts how much of the delayed signal is fed back to the input of the delay.

Config – allows you to choose the position of the Delay pedal in your signal flow: Pre (before the amp model), or Post (after the amp model).

ModSpd – for delays with modulation, controls how fast (or slow) the modulating waveform sweeps.

Depth – for delays with modulation, controls the overall amplitude of the modulating wave.