Controls & Connections

8 Multi-function Knobs – turn any one of these knobs to adjust the corresponding parameter in the display.

3•10

9

See Chapter 4 to learn about Home Page functions for these knobs. Footswitches – these allow you to do the following:

Tone 2 / Hold for Dual – press to toggle between Tone 1 and Tone 2 (you’re editing Tone 2 when the footswitch is lit). Press and hold to turn Dual Tone on or off. See Chapter 4 for more details.

Stomp, Mod, Delay – turns the Stomp, Mod, and Delay processing blocks on or off (the blocks are on when the footswitches are lit). Double-press one of these footswitches to tweak the block. For example, just press the Stomp footswitch two times quickly and you’re instantly taken to the Stomp Box Edit Page. Double-press the same footswitch again (or press the Home button) to leave the Edit Page and return to the Home page. Chapter 5 gives you details on all the Edit Pages available.

Comp/Boost – turns the Compressor processing block on or off. Double-press to tweak the block. This footswitch can also be assigned to the Amp Model or Reverb processing block. See the Pedal info page in Chapter 5 for more details.

Bank Up, Down – these choose amongst POD X3 Live’s 32 banks of User presets. Once you’ve footswitched your way to a new bank, you’ll then also need to step on the A, B, C or D footswitch to actually load a preset from that bank. (We set things up this way so your audience won’t hear you switching through presets as you make your way to your next bank of sounds.)

A, B, C, D – the lights on these footswitches show you which of the Presets in the current User Bank is running. You can step on any of them to choose a different preset.

Page 30
Image 30
Line 6 POD X3 Family manual 310