Example Setups

7•2

Recording Tone 1 & 2 to Separate Mono Tracks
1. Connect outputs to your recorder:
POD X3:• connect the 1/4-inch outs.
POD X3 Live & POD X3 Pro:• the XLR outputs are recommended for live sound
systems, to provide a level that approximately matches a mic’ed up amp. You can
also use them for recording into mic preamps, or use the 1/4-inch outputs to get
hotter, line level outputs.
2. Set the second OUTPUTS page (Studio/Direct Mix):
Tone 1: On•
Tone 1 Pan: pan left•
Tone 2: On•
Tone 2 Pan: pan right•
3. When using the 1/4-inch jacks, also set the first OUTPUTS page (1/4-inch):
Mode: MATCH STUDIO/DIRECT•
4. In your recording system, assign those outputs to separate recording tracks.
Recording Tone 1 & 2 to Separate Stereo Tracks (POD X3 Live

& POD X3 Pro only)

1. Connect the 1/4-inch left/right outputs to your recorder as the source for the first track,
and the XLR left/right outputs as the source for the second track.
2. Set the second OUTPUTS page (Studio/Direct Mixer):
Mode: Studio/Direct•
Tone 1: Off•
Tone 2: On (the XLRs will output Tone 2 only)•
Tone 2 Pan: Center•