Black Box PC118C-R2 manual Table C-1 . Parallel-Interface Specifications

HPIIISi TWINAX CARD

Table C-1 (continued). Parallel-Interface Specifications.

			Parallel
Signal	Return		Cable
Pin	Pin	Signal	Pin	Direction	Description
14	—	AUTO	14	IN	This signal is NOT
		FEED			supported. Defined by
					many printers to add
					a LF to each CR. The
					IBM 5250 protocol
					does not support this
					signal.
15	—	NC	—	—	Not used.
16	—	GND	19	—	Logic Ground.
17	—	CGND	—	—	Chassis Ground.
18	—	NC	—	—	Not used.
19-30	—	GND	21-24	—	Twisted-pair ground
					returns listed above.
31	—	INIT	16	IN	Defined to reset and
					clear the printer when
					LOW; the reset and
					clear are NOT sup-
					ported by the Card.
					The IBM host can’t be
					interrupted by this
					signal. An ACKNLG
					is generated for
					handshaking.
32	—	ERROR	15	OUT	This signal goes LOW
					when the printer is in
					an error state.
33	—	GND	25	—	Logic Ground.
34	—	NC	—	—	Not used.
35	—	HIGH	—	—	Not used.
36	—	SLCTIN	17	—	Not supported.

124