JVC RX-664VBK manual Specifications, Amplifier

Specifications

Output Power At Stereo operation 100 watts per channel, min. RMS, driven into 8 ohms, 40 Hz to 20 kHz with no more than 0.8 % total harmonic distortion.

Amplifier

Output Power	At Surround operation
	Front channels	100 watts per channel, min. RMS,
		driven into 8 ohms at 1 kHz, with no
		more than 0.8% total harmonic
		distortion.
	Center channel	100 watts, min. RMS, driven into 8
		ohms at 1 kHz, with no more than 0.8
		% total harmonic distortion.
	Rear channels	100 watts per channel, min. RMS,
		driven into 8 ohms at 1kHz, with no
		more than 0.8 % total harmonic
		distortion.
Total Harmonic Distortion (8 ohms, 1 kHz)		0.8 %* at 100 watts output
		(* Measured by JVC Audio Analysis
		System)
Frequency Response (8 ohms)	PHONO (MM)	20 Hz to 20 kHz (±1 dB)
	CD, TAPE, TV SOUND, VCR, DVD	20 Hz to 20 kHz (±1 dB)
Audio Input Sensitivity/Impedance (1 kHz)	PHONO	2.7 mV/47 k ohms
	CD, TAPE, TV SOUND, VCR, DVD	220 mV/47 k ohms
Audio Output Level	TAPE, VCR	220 mV
Signal-to-Noise Ratio (’66 IHF/’78 IHF)	PHONO	70 dB/78 dB
	CD, TAPE, TV SOUND, VCR, DVD	87 dB/80 dB
Loudness control (Volume Control at –40 dB)		+5 ±2 dB at 100 Hz
Video Input Sensitivity/Impedance	VCR, DVD	1 Vp-p/75 ohms
Video Output Level	VCR, MONITOR OUT	1 Vp-p (at 1 Vp-p input),
		sync negative
Signal-to-Noise Ratio		45 dB

49