The AV COMPU LINK remote control system allows you to use the five basic functions listed below.
Remote Control of the TV, DVD player, and VCR Using This Remote Control
See page 44 for details.
For the DVD player and the VCR:
•Aim the remote control directly at the remote sensor on the each component.
For the TV having AV COMPU LINK terminal “RECEIVER/AMP”:
•Aim the remote control directly at the remote sensor on the receiver when operating the TV.
For the TV having AV COMPU LINK terminal “AV COMPU LINK EX”:
•Aim the remote control directly at the remote sensor on the TV when operating the
TV.
One-Touch Video Play
Simply by inserting a video cassette without its safety tab into the VCR, you can activate the video playback without setting other switches manually.
The receiver automatically turns on and changes the source to the VCR.
The TV automatically turns on and changes the input mode to the correct position so that you can view the VCR playback.
When you insert a video cassette with its safety tab, press the play (3) button on the VCR or on the remote control. So, you can get the same result.
One-Touch DVD Play
Simply by starting playback on the DVD player, you can enjoy the DVD playback without setting other switches manually.
The receiver automatically turns on and changes the source to “DVD” or “DVD
The TV automatically turns on and changes the input mode to the position so that you can view the playback picture.
Automatic Selection of TV’s Input Mode
•When you select TV SOUND as the source to play through the receiver, the TV automatically changes the input mode to the TV tuner.
So, you can watch TV, without changing the input mode on the TV.
•When you select “DVD,” “DVD MULTI” or “VCR” as the source to play on the receiver, the TV automatically changes the input mode to the correct position (either Video Input 1 or 2) so that you can watch the playback picture.
Automatic Power On/Off
The TV, VCR, and DVD player turn on and off along with the receiver. When you turn on the receiver;
•If the previously selected source is “VCR,” the TV and VCR will turn on automatically.
•If the previously selected source is “TV SOUND,” only the TV will turn on automatically.
•If the previously selected source is “DVD” or “DVD MULTI,” the TV and DVD player will turn on automatically.
When you turn off the receiver, the TV, VCR, and DVD player will turn off.
Note:
Refer also to the manual supplied with your video components.
Note:
When you start playing a disc of
5.1ch surround, “DVD MULTI” will be selected though you have previously selected “DVD.” You can change it to “DVD” after playback starts.
Note:
If you turn off the receiver while recording on the VCR, the VCR will not turn off, but continue recording.
42
