JVC RX-664VBK On the front panel, From the remote control, To cancel a stored preset station

5.Repeat steps 1 to 4 until you store all the stations you want.

To cancel a stored preset station

Storing a new station on a used number erases the previously stored one.

To tune in a preset station

On the front panel:

1. Press TUNER/BAND so that the Control %/ Þ/ @/

#buttons work for tuner settings.

The lamp above the button lights up.

2. Press Control %/ Þuntil “–PRESET+” appears on the display.

3. Press Control @/ # to select a preset channel.

TUNER/BAND

Each time you press the button, the preset channels changes.

•Pressing Control @ changes preset channels in decreasing order.

• Pressing Control # changes preset channels in increasing order.

From the remote control:

1.Press TUNER/BAND.

Each time you press the button, the band alternates between FM and AM.

2.Press 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10 then 5.

•For channel number 20, press +10 then 10.

•For channel number 30, press +10, +10, then 10.

	TUNER/
	BAND
DAP MODE	3D-PHONIC	SURROUND
1	2	3
EFFECT	DELAY	TEST
4	5	6
SEA MODE	SEA PRESET	MENU
7/P	8	9
100+ – REAR•R +		RETURN/ENTER
+10		10

Note:

If you adjust the sound by using SOUND CONTROL while listening to a station, the 10 keys will work for adjusting the sound. To select a preset channel number after the sound adjustment, press TUNER/BAND again, so the 10 keys will work for selecting the preset channel numbers.

22