sponse will reset.
System override
To disarm the system without a remote control:
You will need to use your Override Switch located on your systems control center (see diagram below) to disarm the system. The Override Switch disarms the system only if you have the vehicle key.
To check proper operation:
ssOpen the door. The alarm will sound.
Immediately insert the key into the ignition and turn it to the RUN or ON position. (all the indicators in the dash will turn on).
Press the Override Switch once, the alarm should shut off and now the vehicle should start with the key.
Note: The Override Switch feature allows you to select a specific number of presses needed to disarm the alarm. If the Override Switch has been programmed to a new number of presses by your authorized dealer, that number should be indicated below.
Override Switch Number ___________
© 2008 Directed Electronics. All rights reserved. | 25 |
