Schneider Electric SR2MAN01 user manual Type of counting, Preset value, Parameter lock

LD Language Elements

Configuration The block's parameter settings can be accessed either when entering the command from Front Panel line or from the PARAMETERS menu if the block has not been padlocked.

The parameters to enter are the following:

zType of counting,

zPreset value,

zParameter lock,

zLatching.

Type of counting:

Symbol of the Type of counting parameter:

T

This parameter is used to select the operating mode of the counter:

zTO: upcounting towards the preset value.

When the counter's current value is equal to the preset value, contact C of the counter is conducting.

zFROM: downcounting from the preset value.

When the counter current value equals 0, counter contact C is conducting.

Preset value:

Symbol of the Preset Value parameter:

P

This value is between 0 and 32,767, and represents:

zThe value to reach in the counting mode to the preset value (TO mode),

zthe initial value in the downcounting mode from the preset value (FROM mode).

Parameter lock:

Symbol of the Parameter lock parameter:

Verrouillé

Non verrouillé

Locking prevents the modification of locked parameters from the front panel of the smart relay via the PARAMETERS menu.

114 SR2MAN01 11/2007