Schneider Electric SR2MAN01 user manual Smart Relay Messages, Message Cause Corrective action

Diagnostics

Smart Relay Messages

Description	Here is detailed information on the error messages that are returned by the smart
	relay, their possible causes and how to remedy the problem.

Error Messages The table below lists the error messages that a smart relay could return. These messages generally indicate incompatible actions requested by the user.

Message	Cause	Corrective action
	The user has requested to access the
NO PARAMETER	PARAMETERS option when no parameter is
	available (the diagram does not include any
	elements with parameters).
TRANSF.ERR.	A transfer was in progress and the link with the	See the documentation for the
	PC was unexpectedly interrupted.	programming software.
TRANSFER ERROR: NO	A transfer to the EEPROM was requested and the	Check the presence and correct
MEMORY	EEPROM is not present or incorrectly located.	location of the EEPROM.
	The user has requested to transfer a program	Check the origin of the program to transfer
TRANSFER ERROR:	that does not match the characteristics of the
		and choose a program that is compatible
CONFIG INCOMPAT	target smart relay, for example: Clock, analog
		with the appropriate smart relay.
	input, software version.
TRANSFER ERROR:	This error appears if one of the versions of the
	smart relay does not correspond to: Firmware,	Check the firmware version used.
VERSION. INCOMPAT
	LD or FBD functions
Outputs are displayed	One or more static outputs have shorted or	Troubleshoot, then stop the smart relay
		to end the blinking before selecting
flashing on the main screen	overloaded.
		RUN mode again (automatic reset).

188 SR2MAN01 11/2007