Schneider Electric SR2MAN01 Counters, Description, Use of Coils, z Coil CC Counting Pulse Input

			LD Language Elements
Counters
Description	The Counters function is used to upcount or downcount pulses. The smart relay has
	16 timers, numbered from 1 to 9 then from A to G.
	The Counters function can be reset to zero or to the preset value (depending on the
	chosen parameter) during use.
	It may be used as a contact to find out whether:
	z The preset value has been reached (upcounting mode TO),
	z The counter has reached 0 (downcounting FROM).
Use of Coils
	Each timer has 3 associated coils:
	z Coil CC: Counting Pulse Input,
	z Coil RC: Reset Initial Counter State Input,
	z Coil DC: Counting Direction input.
	The use of these coils is described below.
	Counting pulse input:
	Symbol of the Counting Pulse Input coil of a timer:
	CC-
	When used as a coil in a control diagram, this element represents a counting input
	for the function. Every time the coil is energized, the counter is incremented or
	decremented by 1 according to the counting direction chosen.
	Example: Input counting pulses delivered by counter no. 1.
	I1	CC1

Every time input I1 is energized, the counter no. 1 is incremented by 1.

SR2MAN01 11/2007 111