Schneider Electric SR2MAN01 TEXT and DISPLAY screen, Description, Illustration, C = 0 0

Input/Output Screen

TEXT and DISPLAY screen

Description	The display functions are used to display text or numerical values (current value,
	preset value, etc.) on the LCD display instead of the INPUTS-OUTPUTS:

zIn LD mode: A TEXT function is active,

zin FBD mode: A DISPLAY function is active.

Illustration:
V a l u e c o u n t e r 1
C 1	C = 0 0 0	0 1
D a t e
2 8 / 1 1 / 2 0 0 3
	2
		Menu / OK

Switching

Between the

Screens

If several display functions are active simultaneously:

zIn LD mode: The highest block number is displayed. There are 16 TEXT-type blocks numbered from 1 to 9 then from A to G,

zIn FBD mode: The superposition of all of the FBD DISPLAY screens is displayed, for up to 32 blocks. If more than 32 FBD DISPLAY blocks are active, the screens of the 32 FBD DISPLAY blocks with the lowest numbers are superposed.

Note: The display functions are programmable only from the programming software (see the on-line help for the programming software for more information).

Switching between the screens

It is however possible to go from the TEXT (LD) or DISPLAY (FBD) screen to the INPUTS-OUTPUTS screen and vice-versa.

To do this, proceed as follows:

Step	Step
Action	Press and hold down the Shift key and press the Menu/OK key.

36 SR2MAN01 11/2007