Black Box PC118C-R2 manual Command 02, Alternate CPT-End Delimiter

CHAPTER 5: Configuration

Command: 02, Alternate CPT-End Delimiter

Description:

Creates an alternate end delimiter for command pass-through. Its characteristics are the same as those of the alternate start delimiter defined with command 01, except that it cannot be used as an alternate host/PC download delimiter. As with the start delimiter, the Card will always recognize the primary CPT-end delimiter “&%” as valid even if an alternative CPT-end delimiter has been defined.

Possible Arguments:	Results:
[Any two characters	Defines new alternate end delimiter for command
that are not both	pass-through.
spaces]
[Two spaces]	Deletes previously defined alternate end delimiter.

Example:

“&%Z02,@^” designates “@^”as an additional end delimiter for command pass-through.

Command: 03, Host-Port Timeout

Description:

Use this command to select a new timeout value for the host port. This timeout value is the number of seconds that the Card will wait for data from the host before allowing the printer to honor PC print jobs.

Possible Arguments:	Results:
01 to 60	Sets new timeout value in seconds (*08, 8 seconds,
	is the factory default).

Example:

“&%Z03,05” sets the host-port timeout to five seconds.

21