HPIIISi TWINAX CARD
8.3 EBCDIC Hex Dump
The HPIIISi Twinax Card can be set up to print its buffer in hexadecimal EBCDIC code. This can be useful for a technician to diagnose problems with the Card or the printer.
The EBCDIC hex data is printed on a grid corresponding to the data’s position in the buffer. If the hex data represents a printable character, that character is printed below the hex data.
To start the EBCDIC hex dump from your host, PC, or LAN server, take these steps:
1.Verify that the printer is connected properly to the Card.
2.Type the “&%Z42,1”
3.Send the command to the printer (press the Print Screen button or print the document/ file that contains the command).
4.To stop the buffer hex dump, type “&%Z42,2” on the screen, then send it to the printer (press the Print Screen Button or print the document/file that contains the command).
To start the EBCDIC hex dump from the printer’s operator panel, take these steps:
1.Verify that the Card is installed properly and that the printer is in “READY” mode.
2.Press the “Online” button to take the printer off line.
3.Use the “Menu” button to scroll through the HP menus until you reach the MIO menu associated with the Card.
4.Press “Item” several times until you reach the item “Hex Dump N.”
5.Press “+” to change the display to “Hex Dump Y,” then press “Select” or “Enter” to activate this option.
6.Return to the operating mode by pressing the “Online” button. The Card is now in EBCDIC
7.To stop the EBCDIC
8.Press “Item” several times until you reach “Hex Dump Y.”
9.Press “+” to change the display to “Hex Dump N,” then press “Select” or “Enter” to activate this option.
10.Return to the operating mode by pressing the “Online” button.
100
