Black Box PC118C-R2 manual Command 19, Starting Horizontal Position

CHAPTER 5: Configuration

Command: 19, Starting Horizontal Position

Description:

Use this command to adjust (in increments of 1/60" [423.3 µm]) the starting horizontal print position in the upper left-hand corner of the page, for this job and all subsequent jobs.

Possible Arguments:	Results:
–127 to 127	Sets new horizontal starting position as previous
	starting position plus 1⁄60" x argument (*0 is the
	default).

Example:

“&%Z19,12” moves printing on the page right 1⁄5" [5.1 mm], or 2 characters at 10 CPI.

Command: 20, Star-Panel Overdrive

Description:

If the Card is attached to the host through baluns, twisted-pair cabling, and a passive star panel, use this command to activate star-panel overdrive (that is, to increase signal strength) if problems occur because of the passive star panel. Do not activate overdrive if the Card is directly attached to the host with twinax cabling.

Possible	Results:
Arguments:
*0	Overdrive OFF
1	Overdrive ON

Example:

“&%Z20,1” activates star-panel overdrive.

29