Black Box PC118C-R2 manual Envelope Printing

HPIIISi TWINAX CARD

6.Move the cursor to the beginning of the dashed line and enter the desired selection.

7.Press [ENTER] to activate the selection and exit the print-file menu. To override the print file:

1.Type “OVRPRTF” on the command line of the host, then press [ENTER].

2.Type the name of the print file to be changed.

3.Press [Page Down] to scroll to the third screen.

4.Locate the “Degree of page rotation . . .” option.

5.Move the cursor to the begin-ning of the dashed line and enter the desired selection.

6.Press [ENTER] to activate the selection and exit the print-file menu.

6.5Envelope Printing

Use landscape orientation for envelope printing; place the first line of the address on line 30 and set the left margin to 55. A trial run with a blank sheet of paper helps in positioning the address. There are three ways to select envelopes:

a.Select “Manual Feed” in the word-processing program’s paper-feed selections. The printer displays “3” on the operator panel. Place en- velopes into the manual-feed tray and press “Start/ Stop.” Then press “Paper” to select manual feed.

b.Place envelopes into the paper tray and move the tray stops to the proper position. Specify the bin number in the word-processing program and the printer will print envelopes from the paper tray.

c.Select “Envelope Feed” in the word-processing program’s paper-feed selections, a paper width of 7.5" or 9.5", and a paper length of 11". The printer will automatically find the envelope feeder (if one is installed) and print from the feeder.

50