Command: 98, Restore Defaults or Print Configuration
Description:
Either restores the factory-default configuration settings, prints out a copy of the active configuration settings, or loads the configuration settings stored in permanent nonvolatile memory as the new active configuration.
If you print a document using temporary configuration settings established with host/PC-download commands (that is, settings that haven’t been stored with the “Z99,0” command), “Z98,2” will restore the saved settings from permanent memory.
Note that after you send the “Z98,2” or “Z99,0” command, the active configuration and the stored configuration will be identical.
NOTE
Even restoring factory defaults has no effect on the Card’s twinax address (host/PC-download command 00) or the host language (command 05).
Possible Results:
Arguments:
0Restores the factory-default configuration as the current active configuration
1Prints out the active configuration settings
2Restores the configuration settings stored in NVRAM to active status
Examples:
“&%Z98,0” reloads the factory-default settings as the active configuration; “&%Z98,1” prints out the active configuration settings for review; when placed at the end of a document, “&%Z98,2” restores the standard configuration settings for the next user of the printer.
