Chapter 8: Using the TV’s features

Displaying TV setting information on-screen using RECALL

To display TV setting information on-screen:

Press RECALL on the remote control.

The following information will display on-screen (if applicable):

Current input (ANT 1, ANT 2, VIDEO 1, etc.)

Understanding the auto power off feature

The TV will automatically turn itself off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day. This feature functions in ANT 1 and ANT 2 modes only.

If ANT 1 or ANT 2 is the current input, whether it is Cable TV (“CABLE”) or off-air (“TV”)

Channel number (if in ANT 1 or ANT 2 mode)

STEREO

 

Tuner Hold: On

NC-17

 

 

 

On Timer: Weekdays 12:00pm

 

 

Sleep Timer: 18 min.

 

 

 

Game Timer: 28 min.

 

ANT 1

 

 

Natural

 

CABLE 81-1

 

1080i

5:32pm

 

 

 

 

 

Understanding the last mode memory feature

If the power is cut off while you are viewing the TV, the Last

• Signal strength indicator

Sample RECALL screen

 

(bar graph in lower right

 

corner of screen; for ATSC signal only)

Note: The signal strength indicator will react to fading and increasing signals.

Time (if set)

On/Off timer settings (if set)

Remaining time on sleep timer (if set)

Remaining time on game timer (if set)

Stereo or SAP audio status

V-Chip rating status

Picture size

Tuner hold* (if applicable)

*If you are recording on one tuner (for example, the digital tuner), you will be able to change channels on the other tuner only (the analog tuner in this example). The tuner from which you are recording is Òon holdÓ (i.e., locked) so your recordings will not be affected by channel changes.

Video resolution

To close TV setting information on-screen:

Press RECALL again.

Mode Memory feature automatically turns on the TV when the power is resupplied.

Note: You should unplug the TVÕs power cord if it is possible that you will be away from the TV for an extended period of time after the power is restored.

Using the Gray Level feature

The gray level feature will set the sidebars to three different levels of darkness. Sidebars are the blank spaces on either side of a 4:3 viewing area.

To set the gray level of the sidebars:

1.Press MENU and open the Setup menu.

2.Highlight Gray Level and press •.

3.Press y or zto select your desired level of darkness (1 – Black, 2 – Dark Gray or 3 – Gray).

Setup

 

Installation

 

 

1

 

 

Sleep Timer

 

 

2

 

 

On/Off Timer

 

 

3

 

 

PC Settings

 

 

 

 

 

 

 

 

 

 

 

 

PC Audio

 

No

 

 

 

 

 

 

 

 

 

 

HDMI Audio

 

Auto

 

 

 

 

 

 

 

 

 

 

 

Gray Level

2

 

 

 

 

 

 

 

 

 

 

 

Navigate

Select RTN Back EXIT Exit

 

 

 

 

 

 

 

Note:

¥The gray level feature does not affect video being viewed in 16:9 aspect ratio.

¥When receiving a signal that has sidebars (e,g., 4:3 aspect ratio video over a 1080i or 720p signal), the gray level feature will not be applied to the sidebars.

 

 

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

75

 

 

 

#01E_073-075_27HL95

75

05.9.12, 15:48

 

 

Black

 

 

(E) 27HL95 *Web 213 : 276

Page 75
Image 75
Toshiba 27HL95 manual Understanding the auto power off feature, Understanding the last mode memory feature