Chapter 3: Using the remote control

Learning about the remote control

The buttons used for operating the TV only are described here. For a complete list of the remote control’s functions, see the remote control functional key chart on pages 27.

For a list of the buttons that operate the TV Guide On Screen® system, see page 43.

POWER turns the TV on and off. Press POWER to turn on the TV. The red indicator on the TV will be illuminated. Press POWER again to turn off the TV.

RECALL displays TV setting information on-screen (page 75). INPUT selects the video input source (page 56).

Channel Numbers (0–9,–/100)directly tune channels. The “–” button is used to tune digital channels (page 60) or to display the favorite channel list (page 38).

RTN returns to the last viewed channel (page 60).

INFO provides detailed information on highlighted items in the TV Guide On Screen® system (Chapter 7).

MENU accesses the main TV menu system (pages 29 and 30) or opens a menu in the TV Guide On Screen® system (Chapter 7).

ENTER activates highlighted items in the main menu system and the TV Guide On Screen® system.

Arrow buttons (yzx •) When a menu is on-screen, these buttons select or adjust programming menus. (Also see x / • below.)

FAV yz tunes to the next higher/lower favorite channel (page 38). TV GUIDE opens the TV Guide On Screen® system (Chapter 7).

CH yz cycles through programmed channels when no menu is on-screen (page 60); functions as page up/down when a menu is on-screen or when the TV Guide On Screen® system is open (Chapter 7).

VOL yz adjusts the volume level.

EXIT closes on-screen menus and the TV Guide On Screen® system.

Device Switch switches between TV, CBL/SAT, VCR, and DVD modes (pages 24–26). Set to “TV” to control the TV.

PIC MODE selects the picture mode (page 65). MUTE reduces or turns off the sound (page 70).

PIC SIZE cycles through the five pictures sizes: Natural, TheaterWide 1/2/3, and Full (page 61).

HOME () accesses the home function of the Channel Browserfeature (page 59)

x / While watching TV, these buttons tune to the previous/next channel in the channel history (page 58). (Also see “Arrow buttons” above.)

FREEZE freezes the picture (page 64). SLEEP accesses the sleep timer (page 73).

REC initiates the recording process when in the TV Guide On Screen® system. LIGHT illuminates the keypad for 5 seconds.

Note: The error message ÒNot AvailableÓ will appear if you press a key for a function that is not available.

28

 

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

 

 

#01E_023-028_27HL95

28

05.9.12, 15:34

 

Black

 

(E) 27HL95 *Web 213 : 276

Page 28
Image 28
Toshiba 27HL95 manual Learning about the remote control