Toshiba 27HL95 manual To view the digital signal meter, To view the CableCARD ª menu

Chapter 6: Setting up your TV

Viewing the CableCARD™ menu					Viewing the digital signal meter
A CableCARD™ enables you to view encrypted digital channels.					You can view the digital signal meter for ANT 1 and ANT 2
See page 12 for connection and subscription information.					digital TV input sources only.
After the CableCARD™ is inserted, a CableCARD™ option					To view the digital signal meter:
appears in the Applications menu, with informational screens					1. Press MENU and open the Setup menu.
provided by your CableCARD™ service (see illustrations below).
					2. Highlight Installation and press ENTER. (A new set of
		CableCard Connected -- Acquiring				Installation menu icons will appear on-screen, as shown in
		channel information.				step 3 below.)
		CableCard services will only operate with
		cable signal connected to Antenna 1.
			OK
						Setup
To view the CableCARDª menu:							Installation
1. Press MENU and open the Applications menu.							Sleep Timer
							On/Off Timer
							PC Settings
2. Highlight CableCARD™ and press •.							PC Audio		No
							HDMI Audio		Auto
3. Press yz to select one of the side menu items and press							Gray Level		2
ENTER to display the information.
								Navigate	Select	RTN Back EXIT Exit
					3. Open the Terrestrial menu, highlight Signal Meter, and
						press ENTER.
	Applications
	TV Guide On Screen			Conditional Access
	Digital CC/Audio Selector			CableCARD(tm) Pairing
	CableCARD			CableCARD(tm) Status
				Network Setup
								Terrestrial
								Input Configuration
								Channel program
								Channel Add/Delete
		Navigate Select		RTN Back EXIT Exit				Signal Meter
	Note: The CableCARDª menu has no user-adjustable
	options and is for informational purposes only.
								Navigate	Select	RTN Back EXIT Exit
					4. Use yzx • to select the antenna input and digital channel
						whose signal you want to check.
						Note: The physical digital channel number listed in the Signal
						Meter screen may not correspond to a virtual TV channel
						number. Contact your local broadcasters to obtain the RF
						channel numbers for your local digital stations.
						Signal Meter
						Signal Locked
									0		Peak 0
						Antenna				1
						Physical Digital Channel				13
						Virtual Digital Channel					N/A
									Done
					To close the screen and return to the Terrestrial menu:
						Highlight Done and press ENTER.
					To return to normal viewing:
						Press EXIT.

40		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_038-041_27HL95	40	05.9.12, 15:39
	Black

(E) 27HL95 *Web 213 : 276