60 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HL95 *Web 213 : 276
Tuning your favorite channels
To tune to the channels you programmed as Favorite Channels,
see page 38.

Tuning to the next programmed channel

To tune to the next programmed channel:
Press CH yz on the remote control or TV top panel.
Note:
•This feature will not work unless you program channels into the
TV’s channel memory (see page 36).
•If you are recording a digital channel, you will only be able to
change analog channels while the recording is in progress. If you
are recording an analog channel, you will only be able to change
digital channels while the recording is in progress. This is
because the TV tuner that is being recorded (digital or analog)
will be locked on the channel that is currently recording.

Tuning to a specific channel

(programmed or unprogrammed)

Tuning analog channels:
Press the Channel Number buttons (0–9) on the remote
control. For example, to select channel 125, press 1, 2, 5.
Tuning digital channels:
Press the Channel Number buttons (0–9) on the remote
control, followed by the – (dash) button and then the sub-
channel number. For example, to select digital channel 125-1,
press 1, 2, 5, –, 1.
Note: If a digital channel is not programmed—either through
the automatic channel scan (page 36) or the channel add/
delete function (page 37)—you will have to tune the RF
channel using the Channel Number and Dash buttons on the
remote control.
Tuning channels (continued)

Switching between two channels using

Channel Return

The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1. Select the first channel you want to view.
2. Select a second channel using the Channel Number buttons
(and the dash (–) button if selecting a digital channel).
3. Press RTN on the remote control. The previous channel
will display. Each time you press RTN, the TV will switch
back and forth between the last two channels that were
selected.
Note:
•If you press RTN from a non-antenna input, the TV will
return to the last-viewed ANT input and channel.
•If you are currently recording a program, this feature will
not be available.

Switching between two channels using

SurfLock™

The SurfLock™ feature temporarily “memorizes” one channel
in the RTN button, so you can return to that channel quickly
from any other channel by pressing RTN. To memorize a
channel in the RTN button:
1. Select the channel you want to program into the RTN
button.
2. Press and hold RTN for about 2 seconds until the message
“Channel Memorized” appears on the screen. The channel
has been programmed into the RTN button.
3. You can then change channels repeatedly, and when you
press RTN, the memorized channel will be selected.
Press RTN. The memorized channel will be selected. The TV
will return to the memorized channel one time only. Once you
press RTN and then change channels again, the RTN button
memory will be cleared and the button will function as Channel
Return, by switching back and forth between the last two
channels that were selected.
Chapter 8: Using the TV’s features
RTN
Channel Numbers
CH yz
—
(dash)
#01E_056-064_27HL95 05.9.12, 15:4260
Black