10 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HL95 *Web 213 : 276
___________
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
CableCARD™ is a trademark of Cable Television Laboratories, Inc.
TV back panel connections
1ANT-1 (CABLE) IN and ANT-2 IN — Two inputs that
support analog (NTSC) and digital (ATSC) off-air antenna
signals and analog and digital (QAM) Cable TV signals.
Note: If you have an antenna only, connect it to ANT-1. If you have
both cable TV and an antenna, connect the cable TV to ANT-1 and
the antenna to ANT-2.
2VIDEO 1 IN — Standard (composite) video and standard
audio inputs plus optional S-video input for connecting
devices with composite video or S-video output.
Note: Standard (composite) video and S-video cables carry
only video information; separate audio cables are required for a
complete connection.
3ColorStream
®
HD — ColorStream
®
high-definition
component video and standard stereo audio inputs for
connecting devices with component video output, such as a
Toshiba DVD player with ColorStream
®
. See pages 15 and
17.
Note: Component video cables carry only video information;
separate audio cables are required for a complete connection.
4A/V OUT — Standard composite video and analog audio
outputs for connecting a VCR for editing and dubbing. See
page 18 for details.
5DIGITAL AUDIO OUT — Optical audio output in Dolby
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input. See page 20.
6G-LINK
®
— For use with one of the enclosed IR blaster/
G-LINK
®
cables to enable the TV Guide On Screen
®
recording features. See page 21.
7PC/HDMI Audio IN — For use when connecting a
personal computer or a DVI device with analog audio
output. See pages 19 and 22. Also see items 8 and 10 below.
8HDMI
™
IN — High-Definition Multimedia Interface
input receives digital audio and uncompressed digital video
from an HDMI device or uncompressed digital video from a
DVI device. See page 19.
9CableCARD
™
slot — For use with a digital security card
and digital cable TV service (provided by your local cable
operator) to view encrypted digital programming. See pages
12 and 40.
0PC IN — For use when connecting a personal computer
(PC). See page 22.
Chapter 2: Connecting your TV
TV upper back panel
2
3
4
7
108
659
Power cord
Cable clamper
TV lower back panel
TV back
Before connecting an external device to the TV, remove the
applicable panel cover by squeezing the tab(s) in the direction
of the arrow ( ) and pulling the cover.
#01E_009-011_27HL95 05.9.12, 15:3110
Black