Toshiba 27HL95 manual Setup / Installation menu layout, Navigating the menu system

Chapter 4: Menu layout and navigation

Setup / Installation menu layout

To open the Installation menu (illustrated below), press MENU on the remote control or TV top panel, open the Setup menu, select Installation, and press ENTER.

From Main Menu/Setup menu, select “Installation”

➞Input Configuration ➞ [ Input Configuration Window ]

sub-menu➔

Terrestrial ➞ Channel Program ➞ ANT1 }

➞ ANT2

➞ [ Scan for new channels on desired Antenna ]

➞ Channel Add/Delete ➞ [ Channel Add / Delete Window ]

➞ Signal Meter ➞ [ Signal Meter Window ]

TV Guide On Screen® Setup ➞ Start ➞ [ Launch the TV Guide On Screen® to its Installation area ]

Time and Date ➞ Start Setup ➞ [ Time And Date Setup Window ]

System Status ➞ System Information ➞ [ System Information Window ]

Navigating the menu system

You can use the buttons on the remote
		TV top panel
control or TV top panel to access and
navigate your TV’s on-screen menu system.
•	Press MENU to open the menu
	system.
•	Use the up/down/left/right arrow
		EXIT MENU x • z y
	buttons (yzx •) on the remote
	control or TV top panel to move in the		(ENTER*)
	corresponding direction in a menu.	*The MENU button on the TV top panel functions as
•	Press ENTER to save your menu
		the ENTER button when a menu is on-screen.
	settings or select a highlighted item. (A
	highlighted menu item appears in a
	different color in the menu.)

•All menus close automatically if you do not make a selection within 60 seconds except the signal meter menu which closes automatically after 5 minutes.

•To close a menu instantly, press EXIT.

30		Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
#01E_029-030_27HL95	30	05.9.12, 15:35
	Black

(E) 27HL95 *Web 213 : 276

Remote control

MENU

ENTER

y

x • z

EXIT