Toshiba 27HL95 Tuning channels (continued)

(E) 27HL95 *Web 213 : 276

Tuning channels (continued)

Chapter 8: Using the TV’s features

Adding and clearing channels in the

channel history

Adding channels to the channel history

The Channel Browser automatically creates a history of the

last 32 channels that were tuned in the current input (ANT 1,

ANT 2, and Cable Box inputs only). A separate history will be

stored for each of these inputs.

If you change the input you are viewing:

a) you will begin a channel histor y for that input if one did

not exist; or

b) you will return to the existing channel histor y for that input

if one had already been started.

The Channel Browser will store the following channels:

•All channels that are tuned using the numeric buttons on the

remote control.

•All channels that are tuned for at least 7 seconds using the

CH yz buttons or the FAVyz buttons on the remote

control.

Clearing channels from the channel history

•Turning off the TV will clear all three channel histories

(ANT 1, ANT 2, and Cable Box).

•Removing the CableCARD

™

will clear the channel history

for the ANT 1 input.

•Reconfiguring the ANT 1, ANT 2, or Cable Box input

will clear the channel history for the newly configured

input(s).

Note:

See page 35 for details on configuring the antenna inputs.

Setting a channel as the “Home” channel

for an input

To set a channel as Home using the remote control:

1. Tune the TV to the channel you would like to set as the

Home channel for the current antenna input.

2. Press and hold the HOME ( ) button on the remote

control for 3 seconds. When the Home channel is saved,

the Channel Browser banner will appear at the bottom of

the screen with the home icon flashing green.

Note: You can set a different Home channel for each input

(ANT 1, ANT 2, and Cable Box inputs only).

To set a channel as Home using the menus:

1. Press MENU and open the Preferences menu.

2. Highlight Home CH Setup and press ENTER. The Home

CH Setup window will display.

Done

Home CH Setup

ANT 2

Cable Box

Reset

ANT 1

Note: "Cable Box" will appear in the Home CH Setup

window only if you connected a cable box to your TV.

3. Use the yz buttons to select the input for which you want

to set the Home channel.

4. Use the numeric and dash (–) buttons on the remote

control to enter the desired Home channel for each input.

5. To save your entries, highlight Done and press ENTER.

To clear your entries, highlight Reset and press ENTER.

To tune to the Home channel:

While an input that has a set

Home channel is active, press

the HOME ( ) button on the

remote control.

Note: If you press the HOME

button while an input other than

an antenna or Cable Box input is

selected, the TV will tune to the

most recently tuned Home

channel and input.

Using the Channel Browser™ (continued)

HOME ( )

x/BACK

•/NEXT

#01E_056-064_27HL95 05.9.12, 15:4259

Black