Chapter 8: Using the TV’s features

Labeling the video input sources

You can label each video input source according to the type of device you connected to each source, from the following preset list of labels:

– (default label) Cable

DTV Satellite/DSS

VCR Laser Disk

DVD

Audio Receiver Compact Disc Video Recorder

Hide (to hide an unused input in the Input Selection window)

Note:

4.Press x • to select the desired label for that input source. If a particular input is not used, you can select “Hide” as the label, which will cause that input to be “grayed out” in the input list and skipped over when you press INPUT on the remote control.

5.To save the new input labels, highlight Done and press ENTER. To revert to the factory default labels, highlight Reset and press ENTER.

Input labeling example:

The screen below left shows the default Input Selection screen (with none of the inputs labeled). The screen below right is an example of how you could label the inputs if you had connected a DVD player to VIDEO 1, Cable TV to VIDEO 2, and a DTV set-top box to HDMI. Also note that the ColorStream HD input is labeled “Hidden,” which means that the input will be skipped over when INPUT or TV/VIDEO is pressed.

If you set up a cable box in VIDEO 1, that input will be labeled automatically and cannot be relabeled until you remove the device from the TV Guide On Screen¨ setup.

To label the video input sources:

1.Press MENU and open the Preferences menu.

2.Highlight Input Labeling and press ENTER.

3.Press yz to highlight the video source you want to label.

Preferences

Input Selection

ANT 1

0 ANT 1

1Video 1

2Video 2

3ColorStream HD

4HDMI

5PC

6ANT 2

0 - 6 / INPUT to Select

Input Selection screen with no inputs labeled

Input Selection

ANT 1

0 ANT 1

1DVD

2Cable

3ColorStream HD (Hidden)

4DTV

5PC

6ANT 2

0 - 6 / INPUT to Select

Input Selection screen with

all inputs labeled except input 3, which has been hidden.

 

Favorite Channels

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Closed Caption Mode

 

CC1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Closed Caption Advanced

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Labeling

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu Language

 

English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Home CH Setup

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Navigate

Select RTN Back

EXIT Exit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input Labeling

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video 1

 

 

 

 

 

DVD

 

 

 

Video 2

 

 

 

 

 

Cable

 

 

 

ColorStream HD

 

 

 

 

 

Hide

 

 

 

HDMI

 

 

 

 

 

DTV

 

 

 

PC

 

 

 

 

 

- -

 

 

 

ANT 2

 

 

 

 

 

- -

 

 

 

 

Reset

 

Done

 

 

 

 

 

 

 

 

 

 

 

 

 

To clear the input labels:

1.Press MENU and open the Preferences menu.

2.Highlight Input Labeling and press ENTER.

3.Highlight Reset and press ENTER.

 

 

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

57

 

 

 

#01E_056-064_27HL95

57

05.9.12, 15:42

 

 

Black

 

 

(E) 27HL95 *Web 213 : 276

Page 57
Image 57
Toshiba 27HL95 manual Labeling the video input sources, To label the video input sources, To clear the input labels