Setup
On-Screen Display
Select The Quick Start Option
This feature will select QUICK START UP options. Set this feature to ON to have the TV tune channels (both Analog and Digital) quickly when first turning the TV on. Set this feature to OFF to save electricity. Selecting ON for the QUICK START UP feature will activate the TV tuners circuits when the TV is in “standby mode” which is commonly referred to as “off”. This will allow you to quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will monitor any changes and prepare the television to quickly present a picture. A small amount of electricity is used to continually monitor signals when this feature is selected.
OR
Reset The Software
This feature shows software information and easy upgrade procedure. This function allows the TV software to be upgraded by using a flash card (MMC/SD CARD). If a future software upgrade is required for your TV, HITACHI will notify and provide you with a flash card. In order to receive written notification and the flash card, please complete and return the warranty card.
1.Insert MMC/SD CARD.
2.Press the CURSOR PAD or to highlight
UPGRADE NOW.
3. Press the SELECT button to select and start upgrading.
OR
4. Unplug the power cord or press the POWER button for 5 seconds when the UPGRADE is complete.
NOTE:
Reset TV Settings
Setup
Setup The Menu Options
Set The Power Saving
Set The Inputs
Set The Closed Captions
Select The Quick Start Option 
Reset The Software
Move SEL Select
Setup
Select The Quick Start Option 
Select ON to have the TV tune channels quickly at 1st turn on.
Select OFF to save electricity
Off 
On
Move SEL Select
Setup
Setup The Menu Options
Set The Power Saving
Set The Inputs
Set The Closed Captions
Select The Quick Start Option
Reset The Software
Move SEL Select
Setup
Reset The Software
MMC Software Upgrade : Vxxxx.xxxx Upgrade Now
Please Insert
MMC card before upgrading.
Reset TV Settings
NoYes
(Select "Yes" to return all
settings
to the factory default after main power OFF/ON.)
Move SEL Return
This function allows you to Reset all TV Settings to the original factory settings on all modes during the next power off/on.
1.Use CURSOR PAD , to highlight functions.
2.Press the SELECT button or CURSOR PAD to select Reset the Software Menu.
3.Use the CURSOR PAD to access the Reset TV settings option.
4.Select the "YES" option to Reset ALL the TV functions and unplug the power cord or press the POWER button for 5 seconds.
NOTE: 1. If YES is selected, ALL TV MENU SETTINGS will be reset to the original factory settings on all modes during the power cord is unplugged once or the POWER button is pressed for 5 seconds .
2.When the Quick Start Option has been set to ON , the option of Reset TV Settings will not operate unless the power cord is unplugged once or the POWER button is pressed for 5 seconds.
60
