Screen Display
Audio
Audio Source
Internal Speakers
This function is useful when setting up the external speakers.
ON | Select this feature if using the internal speakers only. |
TV as Center | Select this feature when setting up external speakers from a separate stereo system. |
| The TV’s speakers will work as the center speaker. |
OFF | Select this feature if you prefer to use only speakers from a separate stereo system. |
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio for that channel.
Perfect Volume
This function will automatically adjust volume so each channel and input has the same average volume level.
Loudness
Set this function to ON to emphasize bass and treble at low volume levels.
Language
Some programs transmit more than one DTV language option. Most will have English as a default language. The language function will allow you to select up to 4 language options (if available).
Digital Output
This function allows you to select between Dolby® Digital and PCM. This setting will be fed into optical output.
Dolby®Digital - Select this feature if the TV is connected to an amplifier/receiver with a Dolby®Digital only decoder; it will provide six independent soundtrack channels through the optical output jack (Digital Audio).
NOTE: *Manufactured under license from Dolby Laboratories. “Dolby” and the
PCM - Select this feature if the TV is connected to an amplifier/receiver with a PCM only decoder; it will provide two independent soundtrack channels through the optical output jack (Digital Audio).
On-
DRC
Dynamic Range Compression - Use this function to compress the range of sound volume. By compressing the range of sound volume, it is possible not only to
suppress the output of loud sound at night but also to raise the volume of low sound. The default setting is ON.
Use the CURSOR PAD or to select the chosen options.
OR
Audio |
|
|
| |
|
|
|
| |
| Treble |
|
| 50% |
| Bass |
| 50% | |
| Balance |
|
| L |
| Surround |
|
| Off |
| Bass Boost |
| Off | |
| Audio Source |
| Stereo | |
| Internal Speakers |
| On | |
| Auto Noise Cancel |
| Off | |
| Perfect Volume |
| Off | |
|
|
|
|
|
| Move | SEL Select |
|
|
R
NOTE: The functions Language, Digital Output and DRC are only available when viewing digital programs.
Use the functions at right if your TV is connected to an amplifier/receiver with optical digital input with Dolby® Digital or PCM decoder capabilities.
NOTE: 1.- The DRC control affects only Dolby® Digital signals decoded internally by the TV.
2.- DRC does not affect the Dolby Digital bitstream available at the digital audio output.
|
|
|
|
|
|
| Audio |
|
|
|
| Audio Source | Stereo | |
|
| Internal Speakers | On | |
|
| Auto Noise Cancel | Off | |
|
| Perfect Volume | Off | |
|
| Loudness |
| Off |
|
| Language |
| 1 [Unknown] |
|
| Digital Output | Dolby Digital | |
|
| DRC |
| On |
|
| Lip Sync |
| 0 |
|
|
|
|
|
|
| Move | SEL Select |
|
|
|
|
|
|
Lip Sync
Selecting this feature will allow you to synchronize the audio with the picture signal on a digital or analog source. Use the CURSOR PAD or to synchronize the picture and the audio signal. The default value is set to 0.
44
