First time use
How to set up your new H | Television |
AC CORD AND POWER SWIVEL CABLE INSTALLATION INSTRUCTION
The AC cord and power swivel cable provided with your new LCD Flat Panel Television need to be installed correctly to avoid their disconnection when rotating the TV on its Table top stand.
Located on the back of the TV are 2 plastic clamps to hold the AC cord and power swivel cable. Please follow
the instructions below.
Pass the AC cord through Clamp #1 and connect
it to the TV. Pull on the clamp to tighten the AC cord to the TV.
Connect power swivel cable on one end to the swivel slot of the LCD Rear Panel. Connect the other end to the swivel slot of the Table Top Stand Base.
The AC cord, power swivel cable and the signal cables can all be held together with Clamp #2.
Clamp #1 : Pass the AC cord through this clamp ; then pull the clamp to tighten the AC cord to the TV.
Swivel slot on the LCD back panel.
AC CORD | Clamp #2: Use this clamp to hold the AC cord, power |
swivel connector and the signal cables. |
Swivel slot on Table Top Stand Base.
6