English
LOADING STAPLES
WARNING
●When loading staples into Stapler,
1)do not pull trigger;
2)do not depress push lever; and
3)keep Stapler pointed downward.
(1)Pull the staple feeder back until it latches.
(2)Place the staple strip over the staple guide.
Make sure that the staple strip slides freely on the staple guide.
(3)Press the feeder stop and slide the staple feeder forward until it contacts the staple strip.
The Stapler is now ready to operate.
Feeder
Stop
Staple
Feeder
Staple Staple Guide
STAPLER OPERATION
Read section titled “SAFETY”(pages 4 – 6).
DANGER
● Always wear eye protector.
WARNING
●Never point Stapler toward yourself or anyone else.
●Never carry with finger on trigger.
Remove finger from trigger when not driving staples.
●Never place your hands or feet closer than 8 inches (200 mm) from firing head when using.
●Do not drive staples on top of other staples or with Stapler at too steep of an angle; staples can ricochet and hurt someone.
●Do not drive staples into thin boards or near corners and edges of workpiece. Staples can be driven through or away from workpiece and hit someone.
— 15 —
