English
MAINTENANCE
NOTE:
The information contained in this Manual is designed to assist you in the safe maintenance of the Stapler.
Some illustrations in this Manual may show details or attachments that differ from those on your own Stapler.
MAINTENANCE AND INSPECTION
Read section titled “SAFETY” (pages 4 – 6).
WARNING
●Disconnect air hose and remove all staples from Stapler when:
1)doing maintenance and inspection; and
2)clearing a jam.
1. Clearing a jam
Remove a jammed staple in the following order:
(1)N5008AB
1 Disconnect air hose.
2 Pull the staple feeder back until it latches.
Remove all staples. Press the feeder stop and slide the staple feeder for- ward.
3 Release the lock lever and open the blade guide.
4 Remove the jammed staple.
5 Close the blade guide and latch.
6 In case of frequent jam, contact a Hitachi authorized service center.
(2)N3804AB
1 Disconnect air hose.
2 Pull the staple feeder back until it latches.
Remove all staples. Press the feeder stop and slide the staple feeder for- ward.
3 Using the accessory allen wrench, rmeove two bolts from the bridge piece.
Blade
Guide3
3 | 1 Disconnect |
| |
| air hose |
Lock Lever Staple
Feeder
Front Nose
Bridge Piece
M5 Hex. Socket Hd. Bolt
Allen Wrench
— 17 —
