(Set the switching device to the upward position completely as shown in the diagram. Otherwise, it will be set to CONTACT ACTUATION MECHANISM.)
2Position the nail outlet on the workpiece with finger off the trigger.
3Depress the push lever firmly until it is completely depressed.
4Pull the trigger to drive a nail.
5 Remove finger from the trigger.
To continue nailing in a separate location, move the nailer along the wood, repeating steps 2 - 5 as required.
1Upward position
Switching Device
Trigger
4 3 
Push Lever
WARNING
●A nail will fire each time the trigger is depressed as long as the push lever remains depressed.
(2)Continuous operation (Push lever fire) Using CONTACT ACTUATION MECHANISM
English
WARNING
●To avoid double firing or accidental firing due to recoil.
1)Do not press the nailer against the wood with excessive force.
2)Separate the nailer from the wood as it recoils after nailing.
1Set the switching device to the downward position (to set to CONTACT ACTUATION MECHANISM).
(Set the switching device to the downward position completely as
shown in the diagram. Otherwise, it will not operate properly.)
2Pull the trigger with the Nailer off the
workpiece.
3Depress the push lever against the workpiece to drive a nail.
4Move the Nailer along the workpiece with a bouncing motion.
Each depression of the push lever will
drive a nail.
As soon as the desired number of nails have been driven, remove finger from the trigger.
Switching Device
1 Downward position
Previously pull the trigger
2
4
Push Lever
17