English
4.Maintenance chart (See page 20)
5.Operator troubleshooting (See page 21)
6.Service parts list
A:Item No.
B:Code No.
C:No. Used
D:Remarks
CAUTION
●Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
Maintenance chart
MODIFICATIONS
Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements. Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice.
SERVICE AND REPAIRS
WARNING
●Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer.
●Use only parts supplied or recommended by Hitachi for repair.
All quality Nailers will eventually require servicing or replacement of parts because of wear from normal use.
NOTE:
Specifications are subject to change without any obligation on the part of
HITACHI.
ACTION | WHY | HOW |
|
|
|
Drain air line filter daily. | Prevent accumulation of | Open manual petcock. |
| moisture and dirt. |
|
Keep lubricator filled. | Keep the Nailer | Fill with Hitachi pneumatic |
| lubricated. | tool lubricant. |
Clean filter element — then | Prevent clogging of filter | Follow manufacturer’s |
blow air through filter in | with dirt. | instructions. |
direction opposite to |
|
|
normal flow. |
|
|
Clean magazine and feeder | Prevent a jam. | Blow clean daily. |
mechanism. |
|
|
Keep push lever working | Promote operator safety and | Blow clean daily. |
properly. | efficient Nailer operation. |
|
|
|
|
Lubricate the Nailer after | Extend the Nailer life. | Supply 5 – 10 drops of |
nailing. |
| lubricant into the Nailer. |
Drain air compressor. | Keep the Nailer operated | Open petcock on air |
| properly. | compressor tank. |
20