English
AIR SUPPLY
DANGER
●NEVER use oxygen or other bottled gases. Explosion may occur.
WARNING
●Never connect Nailer to pressure which potentially exceeds 200
psi (13.7 bar 14 kgf/cm2).
●Never use non relieving coupler on Nailer.
1.Power source
Use only clean, dry, regulated compressed air as a power source for this Nailer.
Air compressors used to supply compressed air to this Nailer must comply with the requirements of the latest version of ANSI Standard B 19.3 “Safety Standard For Compressors For Process Industries.”
Moisture or oil in the air compressor may accelerate wear and corrosion in the Nailer. Drain daily.
2.
Use a regulator with a pressure range of 0 – 120 psi (0 – 8.3 bar 0 – 8.5 kgf/cm2).
the Nailer life. These units should always be used.
Filter | The filter removes moisture and dirt mixed in compressed air. |
| Drain daily unless fitted with an automatic drain. |
| Keep the filter clean by regular maintenance. |
Regulator | The regulator controls the operating pressure for safe operation of the |
| Nailer. |
| Inspect the regulator before operation to be sure it operates properly. |
Lubricator | The lubricator supplies an oil mist to the Nailer. |
| Inspect the lubricator before operation to be sure the supply of lubricant |
| is adequate. |
| Use Hitachi pneumatic tool lubricant. |
| Regulator |
Nailer side | Compressor side |
| Filter |
| Lubricator |
11