English

(2)Continuous operation (Push lever fire) Using CONTACT ACTUATION MECHANISM

WARNING

●To avoid double firing or accidental firing due to recoil.

1)Do not press the nailer against the wood with excessive force.

2)Separate the nailer from the wood as it recoils after nailing.

1 Set the switching device to the downward position (to set to CONTACT ACTUATION MECHANISM).

(Set the switching device to the downward position completely as shown in the diagram. Otherwise, it will not operate properly.)

2Pull the trigger with the Nailer off the workpiece.

3Depress the push lever against the workpiece to drive a nail.

4 Move the Nailer along the workpiece with a bouncing motion. Each depression of the push lever will drive a nail.

As soon as the desired number of nails have been driven, remove finger from the trigger.

Previously pull the trigger

4

Switching Device

1 Downward position

2

Push lever

WARNING

●Keep your finger off the trigger except during nailing operation, because serious injury could result if the push lever accidentally contacts you or others in work area.

●Keep hands and body away from the discharge area. This Hitachi nailer may bounce from the recoil of driving a nail and unwanted subsequent nail may be driven, possibly causing injury.

NOTE:

●If all warnings and instructions are followed, safe operation is possible with two systems: SINGLE ACTUATION MECHANISM, and CONTACT ACTUATION MECHANISM.

●Always handle nails and package carefully. If nails are dropped, collating bond may be broken, which will cause mis-feeding and jamming.

20